The feeding distance is separated by the loading, unloading and handling ring to raise or reduce the size of the feeding paper, and finally adjust the screw length. When the high performance punch is installed on the punching die guide rail slider and the severe strike belt touches the undulating rod, the feeding machine just starts the feeding position. Adjusting the screw diastolic pressure length of the severe blow rod can achieve the actual effect of adjusting the feeding time.

2. High speed feeder

Supply time and supply length are controlled by eccentric judges. General service time is from 9pm (270 degrees) to 6pm (90 degrees)

(1) When the double point punch is terminated at 9 o 'clock, turn the eccentric judge so that the eccentric judge coincides with the center line of the groove and the pivot line of the crankshaft connecting rod. In other words, the supply time is from 9 to 6 o 'clock, and if the punch terminates at 12 o 'clock, the eccentric judge gives a 90 degree vertical condition to the expansion slot and connection.

(2) If the punch stops at 8 o 'clock, please repeat the position described. In other words, from 8 o 'clock to 2 o 'clock, the big press can adjust the supply at will.

(3) The relaxation time of raw materials can be adjusted according to the relaxation controller. In order to better feed the length of paper, both ends must be aligned with the end of the inner slide rail of the mold and the relaxation equipment. Because the length of the top of the slide rail inside each moldshell is different, it is necessary to cooperate with the spot.

3. Three in one feeding machine

The feeding machine is equipped with operation panel, which can set the stepping motor of feeding paper immediately, which is very convenient. The accompanying press typically has a control box that can be set immediately to provide viewing Angle and relaxation viewing Angle.

Finally, what must we pay attention to in the work when we apply the punch feeder? Punch feeder is a professional industrial production and manufacturing machinery and equipment, the actual operation includes a lot of operation specifications and implementation plans. Therefore, we say that the punch feeder must pay attention to the specific work.